How To Set Clock On Panasonic Kx Ts580mx

Panasonic Audio, Audio, How to set the time, change the clock, change time

How to set the clock. Panasonic Audio products

Select a model.

---

RX-D550

This is a 24-hour clock.

To Gear up

1. Press [SETUP] repeatedly to select "CLOCK".
2. Printing the arrow upwardly ▲ or downwardly ▼ button to set the time then press [OK].

To bank check the fourth dimension

1. Printing [SETUP]. repeatedly to select "CLOCK" and then press [OK].
2. In standby mode, printing [DISPLAY].

Note:

• The clock is reset when there is a power failure or when the AC ability supply cord is removed.
• Reset the clock regularly to maintain accuracy.
• If the unit of measurement is powered by batteries, the clock setting will exist lost when the unit is turned off.

SC-AKX14

This is a 12-hour clock.

1. Press [CLOCK/TIMER] to select "CLOCK".
   
   
2. Inside 10 seconds press the arrow up ▲ or downwards ▼ push to gear up the time.
3. Press [OK] to stop.

To check the time

1. Press [CLOCK/TIMER].

Notation

• Reset the clock regularly to maintain accurateness.
• The clock is reset when there is a power failure or when the Air conditioning ability supply cord is removed.

SC-AKX18

This is a 12-60 minutes clock.

To Set

1. Press [SETUP] repeatedly to select "CLOCK".
2. Press the arrow up ▲ or down ▼ push button to set the fourth dimension and then press [OK].

To check the time

1. Press [SETUP]. repeatedly to select "CLOCK" and so printing [OK].
2. In standby fashion, press [Brandish].

Note:

• Reset the clock regularly to maintain accuracy.

SC-AKX640

This is a 12-hr clock.

To Set

1. Printing [SETUP] repeatedly to select "CLOCK".
2. Press the arrow left ◄ or right ► push button to to ready the time.
3. Press [OK].

To bank check the time

1. Press [SETUP]. repeatedly to select "CLOCK" and then press [OK].
2. In standby fashion, press [DISPLAY].

Notation:

• Reset the clock regularly to maintain accuracy.

SC-CH400

This is a 12-hour clock.

To Set

1. Press [SETUP] repeatedly to select "CLOCK".
2. Press the arrow upwardly ▲ or down ▼ push to set the time and so printing [OK].

To check the time

1. Press [SETUP]. repeatedly to select "CLOCK" and then press [OK].
2. In standby mode, press [Brandish].

Note:

• Reset the clock regularly to maintain accurateness.

SC-HC200

This is a 12-hour clock.

To Ready

1. Press [SETUP] repeatedly to select "CLOCK".
2. Printing the arrow up ▲ or down ▼ push button to set the time and then printing [OK].

To check the fourth dimension

1. Press [SETUP]. repeatedly to select "CLOCK" and then printing [OK].
2. In standby mode, printing [DISPLAY].

Note:

• Reset the clock regularly to maintain accuracy.

SC-HC25

This is a 12-hour clock.

1. Printing [CLOCK/TIMER] to select "CLOCK".
   
   
2. Within x seconds press the arrow upwards ▲ or downward ▼ button to set the fourth dimension.
3. Printing [OK] to finish.

To check the time

1. Press [CLOCK/TIMER].

Note

• Reset the clock regularly to maintain accuracy.
• The clock is reset when there is a power failure or when the Air conditioning ability supply cord is removed.

SC-HC295

This is a 12-hr clock.

To Prepare

1. Press [SETUP] repeatedly to select "CLOCK".
2. Press the arrow upward ▲ or downwards ▼ button to set up the time and so press [OK].

To check the time

1. Printing [SETUP]. repeatedly to select "CLOCK" and then press [OK].
2. In standby mode, press [Brandish].

Note:

• Reset the clock regularly to maintain accuracy.

SC-HC300

This is a 12-hr clock.

To Set

1. Press [SETUP] repeatedly to select "CLOCK".
2. Press the arrow upwardly ▲ or down ▼ push to set the time and then press [OK].

To check the fourth dimension

1. Press [SETUP]. repeatedly to select "CLOCK" and and then press [OK].
2. In standby fashion, press [Display].

Note:

• Reset the clock regularly to maintain accuracy.

SC-HC400

This is a 12-hr clock.

1. Press [CLOCK/TIMER] to select "CLOCK".
   
   
2. Within 20 seconds press the arrow upward ▲ or downwardly ▼ push to set the time.
3. Press [OK] to end.
   

To check the time

1. Printing [CLOCK/TIMER].

Note

• Reset the clock regularly to maintain accuracy.
• The clock is reset when there is a power failure or when the Ac power supply cord is removed.
• Buttons vary by model

SC-HC410

This is a 12-hour clock.

1. Printing [CLOCK/TIMER] to select "CLOCK".
   
   
2. Inside 20 seconds press the pointer upwardly ▲ or down ▼ push to set up the time.
3. Printing [OK] to finish.
   

To cheque the time

1. Printing [CLOCK/TIMER].

Note

• Reset the clock regularly to maintain accuracy.
• The clock is reset when in that location is a power failure or when the AC power supply cord is removed.
• Buttons vary by model

SC-MAX4700

This is a 12-hr clock.

To Ready

1. Press [SETUP] repeatedly to select "CLOCK".
2. Press the arrow left ◄ or correct ► push to to prepare the time.
3. Press [OK].

To cheque the time

1. Printing [SETUP]. repeatedly to select "CLOCK" then press [OK].
2. In standby mode, press [Display].

Note:

• Reset the clock regularly to maintain accuracy.

SC-MAX670

This is a 12-60 minutes clock.

1. Press [CLOCK/TIMER] to select "CLOCK".
   
   
2. Within 20 seconds printing the arrow upward ▲ or down ▼ push to prepare the fourth dimension.
3. Press [OK] to end.
   

To check the time

1. Printing [CLOCK/TIMER].

Note

• Reset the clock regularly to maintain accuracy.
• The clock is reset when at that place is a power failure or when the Air conditioning ability supply cord is removed.
• Buttons vary by model

SC-MAX8700

This is a 12-hour clock.

To Set

1. Press [SETUP] repeatedly to select "CLOCK".
2. Press the arrow left ◄ or right ► push button to to gear up the time.
3. Press [OK].

To check the time

1. Press [SETUP]. repeatedly to select "CLOCK" and and so press [OK].
2. In standby mode, press [DISPLAY].

Notation:

• Reset the clock regularly to maintain accuracy.

Models SC-PM250, SC-PM600

This is a 12-hour clock.

To Set up

1. Press [SETUP] repeatedly to select "CLOCK".
2. Press the arrow up ▲ or down ▼ button to ready the time and then press [OK].

To cheque the time

1. Press [SETUP]. repeatedly to select "CLOCK" and and then press [OK].
2. In standby mode, press [Brandish].

Note:

• Reset the clock regularly to maintain accurateness.

SC-PMX100, SC-PMX150

This is a 12-hour clock.

1. Printing [CLOCK/TIMER] to select "CLOCK".
   
   
2. Within 20 seconds press the pointer up ▲ or downwardly ▼ button to set the time.
3. Press [OK] to finish.
   

To check the time

1. Press [CLOCK/TIMER].

Notation

• Reset the clock regularly to maintain accurateness.
• The clock is reset when there is a ability failure or when the AC power supply cord is removed.
• Buttons vary by model

SC-PMX80

This is a 12-hour clock.

1. Printing [CLOCK/TIMER] to select "CLOCK".
   
   
2. Within 20 seconds press the arrow upward ▲ or downwardly ▼ button to set the time.
3. Press [OK] to terminate.
   

To check the fourth dimension

1. Press [CLOCK/TIMER].

Note

• Reset the clock regularly to maintain accuracy.
• The clock is reset when in that location is a power failure or when the Air-conditioning power supply cord is removed.
• Buttons vary past model

SC-PMX9, SC-PMX90

This is a 12-hour clock.

1. Press [CLOCK/TIMER] to select "CLOCK".
   
   
2. Within xx seconds press the arrow upward ▲ or downwards ▼ push to set the time.
3. Press [OK] to finish.
   

To bank check the time

1. Press [CLOCK/TIMER].

Annotation

• Reset the clock regularly to maintain accuracy.
• The clock is reset when in that location is a ability failure or when the Ac ability supply cord is removed.

SC-RS50

This is a 12-hour clock.

1. Printing [CLOCK/TIMER] to select "CLOCK".
   
   
2. Within xx seconds press the pointer up ▲ or down ▼ button to set the fourth dimension.
3. Printing [OK] to finish.
   

To bank check the time

1. Press [CLOCK/TIMER].

Note

• Reset the clock regularly to maintain accuracy.
• The clock is reset when at that place is a power failure or when the AC power supply string is removed.
• Buttons vary by model

SC-UA3

This is a 12-hour clock.

To Set

1. Press [SETUP] repeatedly to select "CLOCK".
2. Press the arrow left ◄ or right ► push to to set the time.
3. Press [OK].

To check the fourth dimension

1. Press [SETUP]. repeatedly to select "CLOCK" and then press [OK].
2. In standby style, press [Brandish].

Annotation:

• Reset the clock regularly to maintain accuracy.

SC-UA7

This is a 12-hour clock.

To Gear up

1. Press [SETUP] repeatedly to select "CLOCK".
2. Press the pointer upwards ▲ or down ▼ button to set the time and then press [OK].

To cheque the time

1. Press [SETUP]. repeatedly to select "CLOCK" and then press [OK].
2. In standby fashion, printing [Brandish].

Note:

• Reset the clock regularly to maintain accuracy.

SC-UX100

This is a 12-hour clock.

To Set

1. Press [SETUP] repeatedly to select "CLOCK".
2. Press the pointer up ▲ or downwards ▼ button to fix the time so printing [OK].

To check the time

1. Press [SETUP]. repeatedly to select "CLOCK" and then press [OK].
2. In standby mode, printing [DISPLAY].

Note:

• Reset the clock regularly to maintain accuracy.

Was this answer helpful?

How To Set Clock On Panasonic Kx Ts580mx,

Source: https://eng-ca.faq.panasonic.com/app/answers/detail/a_id/44136/~/how-to-set-the-clock.-panasonic-audio-products

Posted by: martinezswee1991.blogspot.com

Share this post